Reversible Switching CuII/CuI Single Sites Catalyze High-rate and Selective CO2 Photoreduction

Herein, we first design a model of reversible redox-switching metal–organic framework single-unit-cell sheets, where the abundant metal single sites benefit for highly selective CO₂ reduction, while the reversible redox-switching metal sites can effectively activate CO₂ molecules. Taking the synthetic Cu-MOF single-unit-cell sheets as an example, synchrotron-radiation quasi in situ X-ray photoelectron spectra unravel the reversible switching Cu^II/Cu^I single sites initially accept photoexcited electrons and then donate them to CO₂ molecules, which favors the rate-liming activation into CO₂^δ−, verified by in situ FTIR spectra and Gibbs free energy calculations. As an outcome, Cu-MOF single-unit-cell sheets achieve near 100 % selectivity for CO₂ photoreduction to CO with a high rate of 860 μmol g⁻¹ h⁻¹ without any sacrifice reagent or photosensitizer, where both the activity and selectivity outperform previously reported photocatalysts evaluated under similar conditions.     

Low Bandgap 2D Perovskite Single Crystal with Anomalous-large Charges/ions Collection Ratio for Ultra-sensitive and Stable X-ray Detectors

The low-dimensional halide perovskites have attracted increasing attention due to their improved moisture stability, reduced defects, and suppressed ions migration in many optoelectronic devices such as solar cells, light-emitting diodes, X-ray detectors, and so on. However, they are still limited by their large band gap and short charge carriers’ diffusion length. Here, we demonstrate that the introduction of metal ions into organic interlayers of two-dimensional (2D) perovskite by cross-linking the copper paddle-wheel cluster-based lead bromide ([Cu(O₂C−(CH₂)₃−NH₃)₂]PbBr₄) perovskite single crystals with coordination bonds can not only significantly reduce the perovskite band gap to 0.96 eV to boost the X-ray induced charge carriers, but can also selectively improve the charge carriers’ transport along the out-of-plane direction and blocking the ions motion paths. The [Cu(O₂C−(CH₂)₃−NH₃)₂]PbBr₄ single-crystal device can reach a record charges/ions collection ratio of 1.69×10¹⁸±4.7 % μGy_air⁻¹ s, and exhibit a large sensitivity of 1.14×10⁵±7% μC Gy_air⁻¹ cm⁻² with the lowest detectable dose rate of 56 nGy_air s⁻¹ under 120 keV X-rays irradiation. In addition, [Cu(O₂C−(CH₂)₃−NH₃)₂]PbBr₄ single-crystal detector exposed to the air without any encapsulation shows excellent X-ray imaging capability with long-term operational stability without any attenuation of 120 days.     

Selective CO2-to-C2H4 Photoconversion Enabled by Oxygen-Mediated Triatomic Sites in Partially Oxidized Bimetallic Sulfide

Selective CO₂ photoreduction into C₂ fuels under mild conditions suffers from low product yield and poor selectivity owing to the kinetic challenge of C−C coupling. Here, triatomic sites are introduced into bimetallic sulfide to promote C−C coupling for selectively forming C₂ products. As an example, FeCoS₂ atomic layers with different oxidation degrees are first synthesized, demonstrated by X-ray photoelectron spectroscopy and X-ray absorption near edge spectroscopy spectra. Both experiment and theoretical calculation verify more charges aggregate around the introduced oxygen atom, which enables the original Co−Fe dual sites to turn into Co−O−Fe triatomic sites, thus promoting C−C coupling of double *COOH intermediates. Accordingly, the mildly oxidized FeCoS₂ atomic layers exhibit C₂H₄ formation rate of 20.1 μmol g⁻¹ h⁻¹, with the product selectivity and electron selectivity of 82.9 % and 96.7 %, outperforming most previously reported photocatalysts under similar conditions.     

A Spiro Phosphamide Catalyzed Enantioselective Proton Transfer of Ylides in a Free Carbene Insertion into N−H Bonds

Free carbene readily causes multiple side reactions due to its high energy, thus its asymmetric transformation is very difficult. We present here our findings of high-pK_a Brønsted acid catalysts that enable free carbene insertion into N−H bonds of amines to prepare chiral α-amino acid derivatives with high enantioselectivity. Under irradiation with visible light, diazo compounds produce high-energy free carbenes that are captured by amines to form free ylide intermediates, and then the newly designed high-pK_a Brønsted acids, chiral spiro phosphamides, promote the proton transfer of ylides to afford the products. Computational and kinetic studies uncover the principle for the rational design of proton-transfer catalysts and explain how the catalysts accelerate this transformation and provide stereocontrol.     

Synthesis of Multifluoromethylated γ-Sultines by a Photoinduced Radical Addition–Polar Cyclization

Despite the significance of sultines in synthesis, medicine, and materials science, the chemistry of sultines has remained unexplored due to their inaccessibility. Herein, we demonstrate the development of a photoredox-catalyzed multifluoromethyl radical addition/SO₂ incorporation/polar cyclization cascade approach to multifluoromethylated γ-sultines. The reactions proceed by single electron transfer induced multifluoromethyl radical addition to an alkene followed by SO₂ incorporation, and single-electron reduction for polar 5-exo-tet cyclization. Key to the success of the protocol is the use of easily oxidizable multifluoroalkanesulfinates as bifunctional reagents. The reactions proceed with excellent functional-group tolerance to deliver γ-sultines in moderate to excellent yields.     

Nickel-Catalyzed Markovnikov-Selective Hydrodifluoromethylation of Alkynes Using BrCF2H

A Markovnikov-selective hydrodifluoromethylation of alkynes with BrCF₂H via nickel catalysis is described. This protocol proceeds via a migratory insertion of nickel hydride to alkyne followed by a CF₂H-coupling, enabling straightforward access to diverse branched CF₂H-alkenes with high efficiency and exclusive regioselectivity. The mild condition applies to a wide array of aliphatic and aryl alkynes with good functional group compatibility. Mechanistic studies are presented to support the proposed pathway.     

Ferric Single-Site Catalyst Confined in a Zeolite Framework for Propane Dehydrogenation

Non-oxidative dehydrogenation of propane is a highly efficient approach for industrial preparation of propene that is commonly catalyzed by noble Pt or toxic Cr catalysts and suffers from coking. In this work, ferric catalyst confined in a zeolite framework was synthesized by a hydrothermal procedure. The isolated Fe in the framework formed distorted tetrahedra, which were beneficial for the selective dehydrogenation of propane and reached over 95 % propene selectivity and over 99 % total olefins selectivity. This catalyst had a silanol-free structure and was oxygen tolerant, hydrothermally stable, and coke free, with a deactivation constant of 0.01 h⁻¹. This study provided guidance for the synthesis of structural heteroatomic zeolite and efficient propane non-oxidative dehydrogenation over early transition metals.     

Tetrabutylammonium Halides as Selectively Bifunctional Catalysts Enabling the Syntheses of Recyclable High Molecular Weight Salicylic Acid-Based Copolyesters

To synthesize high molecular weight poly(phenolic ester) via a living ring-opening polymerization (ROP) of cyclic phenolic ester monomers remains a critical challenge due to serious transesterification and back-biting reactions. Both phenolic ester bonds in monomer and polymer chains are highly active, and it is difficult so far to distinguish them. In this work, an unprecedented selectively bifunctional catalytic system of tetra-n-butylammonium chloride (TBACl) was discovered to mediate the syntheses of high molecular weight salicylic acid-based copolyesters via a living ROP of salicylate cyclic esters (for poly(salicylic methyl glycolide) (PSMG), M_n=361.8 kg/mol, Ð<1.30). Compared to previous catalysis systems, the side reactions were suppressed remarkably in this catalysis system because phenolic ester bond in monomer can be selectively cleaved over that in polymer chains during ROP progress. Mechanistic studies reveal that the halide anion and alkyl-quaternaryammonium cation work synergistically, where the alkyl-quaternaryammonium cation moiety interacts with the carbonyl group of substrates via non-classical hydrogen bonding. Moreover, these salicylic acid-based copolyesters can be recycled to dimeric monomer under solution condition, and can be recycled to original monomeric monomers without catalyst under sublimation condition.     

Hybrid Double Perovskite Derived Halides Based on Bi and Alkali Metals (K,Rb): Diverse Structures,Tunable Optical Properties and Second Harmonic Generation Responses

Double perovskites (DP) have attracted extensive attention due to their rich structures and wide application prospects in the field of optoelectronics. Here, we report 15 new Bi-based double perovskite derived halides with the general formula of A₂BBiX₆ (A=organic cationic ligand, B=K or Rb, X=Br or I). These materials are synthesized using organic ligands to coordinate with metal ions with a sp³ oxygen, and diverse structure types have been obtained with distinct dimensionalities and connectivity modes. The optical band gaps of these phases can be tuned by changing the halide, the organic ligand and the alkali metal, varying from 2.0 to 2.9 eV. The bromide phases exhibit increasing photoluminescence (PL) intensity with decreasing temperature, while the PL intensity of iodide phases changes nonmonotonically with temperature. Because the majority of these phases are non-centrosymmetric, second harmonic generation (SHG) responses are also measured for selected non-centrosymmetric materials, showing different particle-size-dependent trends. Our findings give rise to a series of new structural types to the DP family, and provide a powerful synthetic handle for symmetry breaking.     

Introducing Bidirectional Axial Coordination into BiVO4@Metal Phthalocyanine Core–Shell Photoanodes for Efficient Water Oxidation

Core-shell photoanodes have shown great potential for photoelectrochemical (PEC) water oxidation. However, the construction of a high-quality interface between the core and shell, as well as a highly catalytic surface, remains a challenge. Herein, guided by computation, we present a BiVO₄ photoanode coated with ZnCoFe polyphthalocyanine using pyrazine as a coordination agent. The bidirectional axial coordination of pyrazine plays a dual role by facilitating intimate interfacial contact between BiVO₄ and ZnCoFe polyphthalocyanine, as well as regulating the electron density and spin configuration of metal sites in ZnCoFe phthalocyanine, thereby promoting the potential-limiting step of *OOH desorption. The resulting photoanode displayed a high photocurrent density of 5.7±0.1 mA cm⁻² at 1.23 V_RHE. This study introduces a new approach for constructing core–shell photoanodes, and uncovers the key role of pyrazine axial coordination in modulating the catalytic activity of metal phthalocyanine.